This kit includes the DJI Matrice 600 + Ronin-MX drone. They combine to capture everything perfectly.

DJI Matrice 600

The Matrice 600 is a flying platform designed for professional aerial photography and industrial applications. It has been built around the most powerful DJI technologies. The A3 flight controller, Lightbridge 2 transmission system, intelligent batteries and battery management system offer maximum performance and rapid set-up.

Ronin-MX

The Ronin-MX has been designed to accommodate the many cameras used daily in the film industry, and SmoothTrack algorithms ensure smooth operation whatever the chosen configuration. The repositioned battery improves balance, and stabilization is enhanced by the presence of a camera cage to secure the camera from above and below. Quiet motors avoid disturbing sound recordings during filming.

ECHNICAL SPECIFICATIONS

MATRIX 600

APPARATUS

STRUCTURE

Diagonal wheelbase	1133 mm
Unit dimensions	1668 mm x 1518 mm x 759 mm (including propeller, arm and GPS) 640 mm x 582 mm x 423 mm (excluding arm and GPS)
Packaging dimensions	620 mm x 320 mm x 505 mm
Quantity of intelligent flight batteries	6
Weight (with six TB47S batteries)	9.1 kg
Weight (with six TB48S batteries)	9.6 kg
Maximum take-off weight	15.1 kg

PROPULSION SYSTEM

Motor model	DJI 6010
Propeller model	DJI 2170

OTHER

Compatible mounting brackets	Brackets for Zenmuse X3; Zenmuse X5 range; Zenmuse XT; Ronin-MX; Zenmuse Z15 HD range: Z15-A7, Z15-BMPCC, Z15-5D III, Z15-GH4
Retractable landing gear	Standard
Operating temperature	From -10° to 40°C

LOADER

Model	A14-100P1A
Output voltage	26,3 V
Power consumption	100 W

BATTERY (OPTIONAL)

Model	TB48S
Capacity	5700 mAh
Voltage	22.8 V
Type	LiPo 6S
Batteries and Power	129.96 Wh
Net weight	680 g
Operating temperature	From -10° to 40°C
Storage temperature	Less than 3 months: -20° to 40°C Over 3 months: 22° to 40°C
Load temperature	From 5° to 40°C
Max. load power	180 W

PERFORMANCE

Overflight accuracy (P-Mode, with GPS)	Vertical: ±0.5 m, Horizontal: ±1.5 m
Max. angular speed	Angle of attack: 300°/s, Yaw: 150°/s
Max. angle of attack	25°
Max. ascent speed	5 m/s
Max. descent speed over 4 m	3 m/s
Max. wind resistance	8 m/s
Max. flight altitude above sea level	2500 m
Maximum speed	18 m/s (no wind)
Hover time (with six TB47S batteries)*	Empty: 35 min, with 6 kg load: 16 min
Hovering flight time (with six TB48S batteries)* (with six TB48S batteries)* (with six TB48S batteries)* (with six TB48S batteries)*)	Empty: 40 min, with 5.5 kg load: 18 min * Hovering time is calculated from a flight at 10 m above sea level, in a wind-protected environment and after landing with 10% battery remaining.

FLIGHT CONTROL SYSTEM

Model	A3

RADIO CONTROL

Operating frequency	920.6 MHz to 928 MHz (Japan) 5.725 GHz to 5.825 GHz 2.400 GHz to 2.483 GHz
Max. transmission distance (without obstacles or interference)	FCC compliant: 5 km Complies with European CE standards: 3.5 km
Transmitter power (EIRP)	10 dBm @ 900 M/li> 13 dBm @ 5.8 G 20 dBm @ 2.4 G
Video output port	HDMI, SDI, USB
Dual-user capability	Master/slave management
Mobile device holder	Works with tablets and phones
Power output	9 W
Operating temperature	From -10° to 40°C
Storage temperature	Less than 3 months: -20° to 40°C Over 3 months: 22° to 40°C
Load temperature	From 0° to 40°C
Built-in battery	6000 mAh, 2S LiPo
Max. shelf width	170 mm

BATTERY (STANDARD)

Model	TB47S
Capacity	4500 mAh
Voltage	22.2 V
Type	LiPo 6S
Batteries and Power	99.9 Wh
Net weight	595 g
Operating temperature	From -10° to 40°C
Storage temperature	Less than 3 months: -20° to 40°C Over 3 months: 22° to 40°C
Load temperature	from 5° to 40°C
Max. load power	180 W

RONIN MX

GENERAL

Integrated functions	Operating modes - Suspended mode - Vertical Mode - Briefcase mode - Aerial mode - Jib or Wirecam mode Integrated independent IMU module DJI Special Pod Motors with Encoders Bluetooth module USB connection 2.4GHz receiver Temperature Sensors DJI 32-Bit DSP Advanced Processor Supports a D-Bus receiver

MECHANICAL AND ELECTRICAL CHARACTERISTICS

Operating current	Static: 300mA (@16V) Dynamic: 600mA (@16V) Locked motors: Max 10A (@16V)
Operating temperature	-15°C ~ 50°C
Weight	Handle included: 2.77kg Vibration absorber included: 2.15kg
Platform dimensions	Without handle: 280mm (W) x 370mm (D)x 340mm (H) With handle: 560mm (W) x 370mm (D) x 440mm (H)

PERIPHERALS

Camera support dimensions	Maximum depth from center of gravity of camera platform: 120 mm Maximum height measured from top of camera platform: 130 mm Maximum width: 160 mm
Accessory power ports	Regulated 12V socket x 2; USB 500mW x 1; DJI Lightbridge x 1
GCU input power	4S Ronin-M Battery
Connections	2.4 GHz radio control; Bluetooth 4.0; USB 2.0
PC/MAC wizard requirements	Windows XP or later; Mac OS X 10.9 or later
Mobile wizard requirements	iOS 7.1 or later; Android 4.3 or later

OPERATING PERFORMANCE

Payload	4,5 kg
Angular momentum angle	± 0.02°
Maximum rotation control speed	Pan axis: 200°/s Tilt axis: 100°/s Roll axis: 30°/s
Mechanical amplitude	Pano axis control: 360° continuous rotation Tilt axis control. : +270° à -150° Roll axis control: ± 110°.
Rotation control range	Pano axis control: 360° continuous rotation Tilt axis control. +45° to -135° Roll axis control: ± 25°.

DRONE DJI MATRICE 600 + RONIN-MX