MICRO RODE NTG1
233,00 €ex. VAT174,00 €ex. VAT
In stock (last pieces)
The NTG-1 microphone offers an electronically balanced output level and operates at 48 V in the P48 standard.
Its bandwidth and directionality control, coupled with low-noise SMT electronics and light weight, make the NTG-1 ideal for simple attachment to a video camera or boom.
The NTG-1 comes complete with its clip and a windscreen that suppresses breath when recording outdoors in normal conditions. Additional accessories are available for other applications.
Its bandwidth and directionality control, coupled with low-noise SMT electronics and light weight, make the NTG-1 ideal for simple attachment to a video camera or boom.
The NTG-1 comes complete with its clip and a windscreen that suppresses breath when recording outdoors in normal conditions. Additional accessories are available for other applications.
Highlights :
- Professional sound quality
- Low-noise circuitry
- Capacitor sensor
- Solid metal construction
- Low weight of approx. 105 g
- Low handling noise
- Supplied with clip and windscreen in pouch
- Designed and manufactured in Australia
- 10-year warranty after registration on rode website
- Low-noise circuitry
- Capacitor sensor
- Solid metal construction
- Low weight of approx. 105 g
- Low handling noise
- Supplied with clip and windscreen in pouch
- Designed and manufactured in Australia
- 10-year warranty after registration on rode website
The NTG-1 works with standard 48V phantom power. It accepts a voltage of between 44 and 52 V in positive polarity between terminals 2 and 3 via the XLR output connector.
Output impedance
The NTG-1 will operate optimally up to a load impedance of 1k Ohm. If a load below this is used, the output signal level will be reduced.
The NTG-1 output is balanced between pins 2 (hot), 3 (cold) and pin 1 (ground).
Output impedance
The NTG-1 will operate optimally up to a load impedance of 1k Ohm. If a load below this is used, the output signal level will be reduced.
The NTG-1 output is balanced between pins 2 (hot), 3 (cold) and pin 1 (ground).
Technical specifications :
Acoustic principle: Line plus gradient
Polar pattern: Super cardioid
Frequency range: 20 Hz ~ 20,000 Hz with high-pass filter at 80 Hz (12 dB/octave)
Output impedance: 50 Ω
Signal-to-noise ratio (DIN/IEC 651): 76 dB (1 kHz rel 1 Pa; for IEC 651, IEC 268-15)
Equivalent noise: 18 dB SPL (for IEC 651, IEC 268-15)
Maximum SPL: 139 dB (@ 1% THD at 1 kΩ)
Sensitivity at 1 kHz into 1 kΩ: -36 dB re 1Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB (at 1 kHz in open-circuit free field)
Dynamic range - DIN/IEC 651 amp: 121 dB (for IEC 651, IEC 268-15)
Power supply: P48 phantom, 44 to 52 V
Power consumption: 3.5 mA
Output connectors: 3-pin XLR, balanced output between pins 2 (+), 3 (-) and 1 (ground)
Average weight: 105 grams
Polar pattern: Super cardioid
Frequency range: 20 Hz ~ 20,000 Hz with high-pass filter at 80 Hz (12 dB/octave)
Output impedance: 50 Ω
Signal-to-noise ratio (DIN/IEC 651): 76 dB (1 kHz rel 1 Pa; for IEC 651, IEC 268-15)
Equivalent noise: 18 dB SPL (for IEC 651, IEC 268-15)
Maximum SPL: 139 dB (@ 1% THD at 1 kΩ)
Sensitivity at 1 kHz into 1 kΩ: -36 dB re 1Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB (at 1 kHz in open-circuit free field)
Dynamic range - DIN/IEC 651 amp: 121 dB (for IEC 651, IEC 268-15)
Power supply: P48 phantom, 44 to 52 V
Power consumption: 3.5 mA
Output connectors: 3-pin XLR, balanced output between pins 2 (+), 3 (-) and 1 (ground)
Average weight: 105 grams
Box contents :
1 NTG1 shotgun microphone
1 RM5 rugged microphone clip
1 WSVM windscreen
1 ZP1 black zipped and padded pouch
