MICRO RODE NTG2

The RØDE NTG-2 is a lightweight shotgun condenser microphone, specially designed for professional use in film, video, television and production. The NTG-2 offers a balanced, low-impedance output level, and operates on both 1.5 V AA internal battery and 48 V P48 standard. Its bandwidth and directivity control, coupled with low-noise SMT electronics, make the NTG-2 the ideal choice for the film, video and dubbing industries. Its light weight makes it easy to attach to a video camera or boom.

Highlights :

• Professional sound quality
• Solid metal construction
• Capacitor sensor
• Weight reduced to approx. 161 g
• Low-noise circuit
• Low handling noise
• Supplied with a clip in a pouch
• Designed and manufactured in Australia
• 10-year warranty after registration on the RODE website

The NTG-2 comes with its own clip and a windscreen to suppress wind noise when recording outdoors in normal conditions.

This RODE miicro operates on standard 48 V phantom power or a 1.5 V alkaline battery. It accepts a voltage of between 44 and 52 V in positive polarity between terminals 2 and 3 via the XLR output connector. The NTG-2 will operate optimally up to a load impedance of 1k Ohm. If a load below this is used, the output signal level will be reduced. The NTG-2 output is balanced between pins 2 (hot), 3 (cold) and pin 1 (ground).

Technical specifications :

Acoustic principle	Line Gradient
Active electronics	JFET impedance converter with balanced transformer output
Capsule	0.50″
Directivity
Capture	End
Bandwidth	20Hz - 20kHz
Output impedance	250Ω
Maximum sound pressure level (SPL)	131dB (@1kHz, 1% harmonic distortion at 1kΩ)
Maximum output level	6.9dBu (@1kHz, 1% harmonic distortion at 1kΩ)
Sensitivity	-36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
Equivalent noise level (A-weighted)	18dB-A
Power supply
Equivalent noise level (A-weighted)	161.00gm
Equivalent noise level (A-weighted)	280.00mmH x 22.00mmW x 22.00mmD
Output
Warranty	1 year with free warranty extension to 10 years after registration here

Box contents :