The RovoRx-HDMI is a receiver for UltraHD/HD video streams over HDBaseT, with integrated HDMI video audio outputs, specially developed to receive RovoCam signals. Receive video and audio streams from the RovoCam up to 100 meters away, and view images on HDMI monitors or other devices.

The RovoRx-HDMI receiver's HDBaseT connector provides uncompressed video, audio, camera control and power, all carried on a single Cat 5e/6 cable for easy wiring and system integration.

The connections included with the RovoRx-HDMI are:

- 1 x UltraHD/HD HDMI output
- 1 x RCA audio output
- 1 x USB port
- 1x RS-232 port
- 1 x HDBaseT connector (RJ-45) for power, control and interaction with the camera via a single Cat 5e/6 cable.

Highlights :

- 1 x UltraHD/HD HDMI output
- 1 x RCA* audio output
- 1 x USB port
- 1x RS-232 port
- 1 x HDBaseT connector (RJ-45) for power, control and interaction with the camera via a single Cat 5e/6 cable.

* RovoCam audio is not routed via the RovoRx-HDMi audio output, but via RCA channel 2.

RovoCam
Camera Module	Sony FCB-ER8300
Video Formats	(UltraHD) 3840x2160p 25, 29.97 (HD) 1080p 50, 59.94 (HD) 1080i 50, 59.94 (HD) 1080p 50, 59.94 (HD) 720p 50, 59.94 720x480p 59.94 720x576p 50
Pixel Format	YUV 4:2:2 RGB 4:4:4
Sensor	Progressive scan CMOS, 1/2.3 3840×2160 8.93 Mega Pixels
Lens	Focal Length: 3.9mm to 46.8mm
F value	1.8 to 2.0
Horizontal angle of view	70.7 degrees (wide), 6.2 degrees (Tele)
Magnification	12x optical, 20x with Super Resolution Zoom
Lens Control	Zoom, Focus, Iris, IRCS
White Balance	Auto, ATW, Indoor, Outdoor, One Push, Manual, Sodium lamp
Focus	Auto, Manual, One push trigger mode
Digital Zoom	12x
Super Resolution Zoom	UHD: 1.67x (max 20x combined with 12x optical zoom) HD: 2.0x (max 24x combined with 12x optical zoom)
Image Processor	Noise reduction (2D/3D) Visibility Enhancer ICR (Day and Night) Slow AE High Sensitivity Gamma Character Generator Defog Color Enhancement Picture Effect Spherical Privacy Zone Masking E-Flip
Video Output Digital	HDBaseT (RJ-45, Requires Receiver Unit) Cat 5e 70m (230 ft) or Cat 6a 100m (328 ft)
Audio Input Analog	1 x 3.5mm TRS Input with 3V PiP (Plug in Power)
Control	1 x 3.5mm TRS Input for VISCA camera control. *RS-232 can also pass the control from the RovoRx-HDMI Unit as well.
User Interface	VISCA Compatible Control Software and Hardware AJA Control Software TBD
Physical	Width: 2.8" (71mm) Length: 5.9" (149.9mm) Height: Including tripod mount and cold shoe - 3.6" (91.4mm) Power: 10-12Vdc 2 pin pluggable terminal block, 0.6A max 6W typical, 8W max OR Power over HDBaseT Conforming to IEEE802.3af-2003 mode A 6W typical, 8W max Weight: 2.2 lbs (1kg) Safe Operating Temperature Range: 0C to 40C (32F to 104F)
RovoRx-HDMI
Video Input	HDBaseT (RJ-45)
Video Output Digital (When in use with RovoCam)	HDMI 1.4b
Audio Output Analog	2-channel unbalanced 2 x RCA connectors
RS-232	1 x 3.5mm TRS Input for VISCA camera control.
USB	1 x USB for firmware and additional control
Physical	Width: 4.03" (102.4mm) Length: 5.2" (132mm) Height: 0.94" (23.9mm) Power: RovoRx-HDMI only: 48V @ 125mA = 6W typical, 48V @ 156mA = 7.5W max RovoRx-HDMI powering RovoCam: 48V @ 271mA = 13W typical, 48V @ 312mA = 15W max Weight: 2.2 lbs (1kg) Safe Operating Temperature Range: -5C to 40C (23F to 104F)

Technical specifications

PDF

AJA ROVORX-HDMI CONVERTER

Highlights :

Technical specifications

PDF