AUDIOTECHNICA AT8035 MICROPHONE

Highly accurate capture, even in noisy environments

The AT8035 is ideal for videos and films, but must be installed outside the image, i.e. out of the camera's field of view. This type of microphone, with an interference tube in front of the capsule, cancels out much of the off-axis sound. Audio-Technica's in-line condenser microphones combine a directional ("gradient") capsule with an interference tube to also eliminate sound coming from behind.
As a general rule, the interference tube of this type of microphone can be lengthened to reduce the angle of acceptance and thus increase the pick-up distance. Short in-line condenser microphones don't have as long a pick-up range as long models, but their wider acceptance angle is often preferred in some cases, when accuracy at the source is less important.

Highlights : 

• 369mm shotgun microphone for video production and broadcast applications (ENG/EFP)
• Provides the narrow acceptance angle needed for distant sound pickups
• Captures sound with high intelligibility in noisy environments, thanks to excellent off-axis rejection of sound coming from the sides and rear
• Two power supply modes (battery or phantom power) for great versatility
• 80Hz bass attenuation, with a slope of 18dB/octave to reduce sensitivity to low-frequency ambient noise
• Effective protection against interference from nearby cell phones and other unwanted radio frequencies
• Equipped with a foam windscreen, the AT8035 comes with a 1.5V AA battery, a stand clamp and a carrying case.

Bass attenuation filter

The low-cut position reduces sensitivity to low-frequency ambient noise, such as traffic noise, ventilation noise, room reverberation or vibrations transmitted mechanically by the recording device.

Two power supply modes

The AT8035 shotgun microphone can be powered in two ways, for maximum versatility. You can use it on a professional camera or recorder equipped with XLR inputs and phantom power, or with a 1.5V AA battery (included) on any device equipped with XLR inputs.

High intelligibility

Its tight directivity provides the narrow acceptance angle needed for distant sound pickup, while maintaining excellent off-axis noise rejection. The AT8035 guarantees highly accurate audio capture with high intelligibility.

BATTERY OR phantom 48V

Two power supply modes (battery or phantom power) for great versatility.

LOW-CUT FILTER

Switchable flat / low-cut positions for better isolation from unwanted noise.

Line + gradient

The AT8035 combines a directional capsule (gradient) and an interference tube to eliminate sound coming from the rear.

Accessories

Supplied with clip, foam windscreen, 1.5V AA battery, two O-rings and carrying case.