Teradek Bolt 4K Max TX/RX (V-Mount) - HF Transmitter Receiver Kit
Introducing the Teradek Bolt 4K Max TX/RX (V-Mount)
The Teradek Bolt 4K Max TX/RX (V-Mount) is a reliable, high-performance wireless video transmission/reception kit, capable of transmitting video up to 1500m with a 4K Array antenna.
It features a fixed frequency mode, which locks onto your designated 5GHz channel for enhanced performance in harsh environments.
This high-performance kit incorporates uniquely designed antennas, delivering a strong, clear signal, and faster reconnection times over long distances.
Broadcast mode supercharges your wireless link and supports an unlimited number of simultaneous receivers.
With the Teradek Bolt 4K Max TX/RX kit, you can transmit up to 1080p120!
Teradek Bolt 4K Max TX/RX (V-Mount) highlights
- Transmits video at up to 4K 60ips
- Range up to 900 metres
- 12G-SDI, HDMI 2.0 inputs
- 12G-SDI, HDMI 2.0 outputs
- Multicast for up to 6 receivers
- Compatible with 4K 750, Bolt 4K 1500
CARACTÉRISTIQUES
| Transmitter | Bolt 4K MAX TX V-Mount |
| Video – | |
| Video Inputs | 1 x 12G-SDI SMPTE 2082-1 standard / 75 Ω (accepts 12G-SDI, 6G-SDI, or 3G-SDI) |
| 1 x HDMI Type-A receptacle accepts HDMI 2.0 or HDMI 1.4) | |
| Video Outputs | 1 x Loopout 12G-SDI SMPTE 2082-1 standard / 75 Ω |
| SDI Ancillary Data Support | Supports transmitting metadata, timecode, and start/stop flags from most camera manufacturers. |
| Color Sampling | SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB 4:4:4, 8-bit |
| Input Cross Conversion | Yes, HDMI to SDI |
| Delay Tx To Rx | <0.001sec |
| Supported Resolutions – | |
| Supported Resolutions | 4Kp23.98/24/25/29.97/30/50/59.94/60 |
| 1080p23.98/24/25/29.97/30/50/59.94/60 | |
| 1080psf23.98/24/25/29.97/30 | |
| 1080i50/59.94/60 | |
| 720p50/59.94/60 | |
| 480p50 576p59.94/60 | |
| 480i(NTSC)/576i(PAL) | |
| Video Processing – | |
| Video Compression | Visually Lossless |
| Video Format Conversion Support | Connect an HD source to the Tx and get a 4K signal out of Rx |
| Connect a 4K source to the Tx, get HD resolution out of Rx | |
| You can also mix & match from a single source: | |
| 4K signal into Tx can be 4K output from 1x Rx and HD output from a 2nd Rx | |
| Input/output configurations are controlled directly on units or via Bolt 4K app | |
| Color Correction | None |
| Audio Processing – | |
| Audio Format | 48kHz 24-bit PCM |
| Inputs – | |
| Audio Input | Embedded SDI/HDMI Audio Input (2 Channel) |
| Physical – | |
| Dimensions | 132 x 91 x 27 mm |
| Weight | Bolt 4K Tx without antennas (no battery plates) = 360g |
| Bolt 4K Tx with 4x antennas (no battery plates) = 408g | |
| Bolt 4K Rx without antennas (no battery plates) = 440g | |
| Bolt 4K Rx with 5x antennas (no battery plates) = 496g | |
| Gold-Mount battery plate set (male+female) = +172g | |
| V-Mount battery plate set (male+female) = +220 g | |
| Construction | Milled Aluminum(Chassis) and regulation-compliant PCB |
| Mountability | Integrated V-Mount Male and Female (with passthrough power) |
| Multiple mounting options with M3 and 3/8″ holes | |
| Interfaces – | |
| Configuration Interfaces | OSD with Menu, Joystick Navigation |
| Switches | On/Off Switch |
| Usb Interface Functionality | Upgrade via Micro-USB |
| Network – | |
| Antennas | 4 External 2dBi RP-SMA antennas (included) |
| Wireless | Non-DFS Frequencies: |
| 5.190 ~ 5.230 GHz and 5.755 ~ 5.795 GHz | |
| DFS Frequencies: | |
| 5.270 ~ 5.670 GHz | |
| Channel Bandwidth | 14x 40MHz wide channels |
| Rf Channel Selection | Auto, Manual |
| Manual available for non-DFS Channels | |
| Encryption | AES-256, RSA-1024 key exchange |
| Rf Power | 19 dbm EIRP (4 external 2dBi antennas) (<80mW transmit power) |
| Range | Up to 1500 ft, line of sight |
| Unicast Multicast | Can connect one Transmitter to up to 6 Receivers |
| Noise Rejection | Can coexist with WiFi and 5GHz cordless phones |
| Can operate up to 6 sets in same location | |
| Power – | |
| Power Input | 2-Pin Circular locking Connector 7-28V DC |
| Battery | None, optional Gold or V mount battery plate |
| Nominal Power Consumption | 20 Watts |
| Environmental – | |
| Operating Temperature | 0-40℃ |
| Receiver | Bolt 4K MAX RX V-Mount |
| Video – | |
| Video Outputs | 2 x 12G-SDI SMPTE 2082-1 standard / 75 Ω (accepts 12G-SDI, 6G-SDI, or 3G-SDI) |
| 1 x HDMI Type-A receptacle accepts HDMI 2.0 or HDMI 1.4) | |
| SDI Ancillary Data Support | Supports transmitting metadata, timecode, and start/stop flags from most camera manufacturers. |
| Color Sampling | SDI: YCbCr 4:2:2, 10-bit/ HDMI: RGB 4:4:4, 8-bit |
| Input Cross Conversion | Yes, HDMI to SDI |
| Delay Tx To Rx | <0.001sec |
| Supported Resolutions – | |
| Supported Resolutions | 4Kp23.98/24/25/29.97/30/50/59.94/60 |
| 1080p23.98/24/25/29.97/30/50/59.94/60 | |
| 1080psf23.98/24/25/29.97/30 | |
| 1080i50/59.94/60 | |
| 720p50/59.94/60 | |
| 480p50 576p59.94/60 | |
| 480i(NTSC)/576i(PAL) | |
| Video Processing – | |
| Video Compression | Visually Lossless |
| Video Format Conversion Support | Connect an HD source to the Tx and get a 4K signal out of Rx |
| Connect a 4K source to the Tx, get HD resolution out of Rx | |
| You can also mix & match from a single source: | |
| 4K signal into Tx can be 4K output from 1x Rx and HD output from a 2nd Rx | |
| Input/output configurations are controlled directly on units or via Bolt 4K app | |
| Color Correction | 17x17x17 3D LUT (supports 10-bit color) |
| Audio Processing – | |
| Audio Format | 48kHz 24-bit PCM |
| Outputs – | |
| Audio Output | Embedded SDI/HDMI Audio Output (2 Channel) |
| Physical – | |
| Dimensions | 112 x 139 x 27 mm |
| Weight | Bolt 4K Tx without antennas (no battery plates) = 360g |
| Bolt 4K Tx with 4x antennas (no battery plates) = 408g | |
| Bolt 4K Rx without antennas (no battery plates) = 440g | |
| Bolt 4K Rx with 5x antennas (no battery plates) = 496g | |
| Gold-Mount battery plate set (male+female) = +172g | |
| V-Mount battery plate set (male+female) = +220 g | |
| Construction | Milled Aluminum(Chassis) and regulation-compliant PCB |
| Mountability | Integrated V-Mount Male and Female (with passthrough power) |
| Multiple mounting options with M3 and 3/8″ holes | |
| Interfaces – | |
| Configuration Interfaces | OSD with Menu, Joystick Navigation |
| Switches | On/Off Switch |
| Usb Interface Functionality | Upgrade via Micro-USB |
| Network – | |
| Antennas | 5 External 2 dBi antennas (included) or optional Array Panel Antenna |
| Wireless | Non-DFS Frequencies: |
| 5.190 ~ 5.230 GHz and 5.755 ~ 5.795 GHz | |
| DFS Frequencies: | |
| 5.270 ~ 5.670 GHz | |
| Channel Bandwidth | 14x 40MHz wide channels |
| Rf Channel Selection | Auto, Manual |
| Manual available for non-DFS Channels | |
| Encryption | AES-256, RSA-1024 key exchange |
| Rf Power | 17 dbm EIRP (one external 2dBi antenna) (<51mW transmit power) |
| Range | Up to 3000 ft, line of sight |
| Unicast Multicast | Can connect one Transmitter to up to 6 Receivers |
| Noise Rejection | Can coexist with WiFi and 5GHz cordless phones |
| Can operate up to 6 sets in same location | |
| Power – | 2-Pin Circular locking Connector 6-28 VDC |
| Power Input | |
| Battery | None, optional Gold or V mount battery plate |
| Nominal Power Consumption | 18 Watts |
| Environmental – | |
| Operating Temperature | 0-40℃ |
IN THE BOX
1 x Bolt MAX 12G-SDI / HDMI TX V-Mount
1 x Bolt MAX 12G-SDI / HDMI RX V-Mount
1 x Lamp holder adapter 3/8in
1 x Hotshoe adapter
2 x HDMI type A male cable - 18" HDMI type A male cable
2 x (Bit 118) 2-pin connector to PowerTap - 18" cable
1 x USB cable male type A - USB cable male type B (micro) - 3 inch
2 x SDI 12G BNC to BNC cables Length: 18 inches / 46 cm
1 x Teradek Large Case - Bolt 4K TX/2RX
1 x Teradek Vinyl Zipper Bag 250x150mm
1 x Teradek Vinyl Zipper Bag 250x230mm
1 x 2-pin to 30W (Int) power adapter - 6-inch cable
9 x 2dBi WIFI antenna 2.4 / 5.8GHz (small antenna)
1 x Quick Start Guide - Bolt 4K 750/1500