Magewell Pro Convert Audio DX
Présentation Magewell Pro Convert Audio DX
Le Magewell Pro Convert Audio DX est un dispositif de conversion et de capture audio IP extrêmement flexible, qui vous permet de convertir facilement l’audio entre Dante®, NDI® et SRT dans plusieurs directions. C’est l’appareil idéal pour relier les logiciels, l’audio et les réseaux IP.
Points forts Pro Convert Audio DX
– Encodez l’audio analogique dans Dante®, NDI® et SRT
– Décode les flux audio IP dans Dante®, NDI® et SRT (sortie analogique)
– Capturez l’audio sur votre PC ou ordinateur portable via USB
Caractéristiques
Receiving/Input Features
- Support for sample rates of 96/48/44.1 KHz, and 16/24bit sample depth
- 1 x 2-channel 3.5mm TRS unbalanced in (5k Ohm)
- 1 x 2-channel 4.4mm TRRRS balanced in (20k Ohm)
- 1 x 4-channel 24-bit/48k USB Audio Class in
- Receiving 8-channel 24-bit Dante® flows in unicast or multicast
- Receiving 1 x 4-channel 16-bit SRT network audio stream
- Receiving 1 x 4-channel 16-bit NDI® network audio stream
- Support for PTP master/slave
- Total harmonic distortion < 0.01% @ +4dBu
- Frequency Response 20Hz ~ 20kHz (-/+0.5dB)
- Signal to noise ratio > 100dB
- Dynamic range > 100dB
- Max signal level: unbalanced at 12dBu, balanced at 24dBu
Transmitting/Output Features
- Support for sample rates of 96/48/44.1 KHz, and 16/24bit sample depth
- 1 x 2-channel 3.5mm TRS unbalanced out (10 Ohm)
- 1 x 2-channel 4.4mm TRRRS balanced out (150 Ohm)
- 1 x 4-channel 24-bit/48k UAC out
- Encoding 8-channel 24-bit Dante® flows in unicast or multicast
- Encoding 1 x 4-channel 16-bit SRT network audio stream
- Encoding 1 x 4-channel 16-bit NDI® network audio stream
- Encoding 1 x 4-channel 16-bit RTSP network audio stream
- Support for PTP master/slave
- Total harmonic distortion < 0.01% @ +4dBu
- Frequency Response 20Hz ~ 20kHz (-/+0.5dB)
- Dynamic range > 100dB
- Signal to noise ratio > 100dB
- Max signal level: unbalanced at 12dBu, balanced at 18dBu
Configuration Management
- Support for Dante Controller, providing signal routing and configuration
- Registration with Magewell Cloud
- Remote control via WebUI and Magewell Cloud
- Provision of comprehensive information regarding the device and signals in real-time
- Configuration of how an input is processed and encoded, including sampling, packets, PTPv2 (IEEE 1588–2008), volume setting, audio matrix, buffer, as well as the network connection
- Support for updating firmware
- Support for USB NET
- Support for IE/Edge/Firefox/Chrome/Safari/Opera web browsers
- Provision of HTTP APIs
Interfaces
- 10/100/1000Mbps with PoE (IEEE 802.3af)
- USB2.0 Type B
- 5V/2.1A power supply
- USB NET
- 3.5mm TRS unbanlanced IN/OUT
- 4.4mm TRRRS banlanced IN/OUT
LED Indicators
- Power LED indications:
- on: power on
- off: power off
- PTP LED indications:
- on: synced
- off: not synced
- blinking: syncing
Form Factor
- 100.9mm (L) x 60.2mm (W)x 23.3mm (H)
Accessories
- 4.4mm to Dual XLR Male Cable
- 4.4mm to Dual XLR Female Cable
- USB 2.0 cable (Type A to Type B)
- Universal power adapter
- L bracket
On-board Control Buttons
- 16 Position Rotary DIP Switch: set board-index from 0 to F
Screw Mounting Hole
- ¼–20 threaded hole
Power Consumption
- 5V max current: ~ 1 A
- Max power consumption: ~ 5 W
Working Environment
- Operating temperature: 0 to 40 deg C
- Storage temperature: –20 to 70 deg C
- Relative humidity: 5% to 90% non-condensing