Teradek Bolt 4K LT MAX TX/RX Deluxe Set (V-Mount) – Kit HF
15 908,40 €TTC
13 257,00 €HT
Disponible en pré-commande
Disponible en précommande
Présentation du Teradek Bolt 4K LT MAX TX/RX Deluxe Set (V-Mount)
Le Teradek Bolt 4K LT MAX TX/RX Deluxe Set (V-Mount) est un système vidéo 4K HDR 10 bits sans fil. Compact et léger (17% plus léger que le Bolt 3000), il offre une portée de transmission sans fil jusqu’à 1500m et zéro délai. Le système peut transmettre les métadonnées de la caméra, le timecode et les start/stop flags. Il est compatible avec avec tous les appareils de la gamme Bolt 4K et peut appairer jusqu’à 6 récepteurs. L’appairage est ultra-rapide et la configuration est intuitive grâce à l’application Bolt Manager App. Un cryptage AES-256 et DFS amélioré empêche l’accès non autorisé pour plus de sécurité.
Points forts du Teradek Bolt 4K LT MAX TX/RX Deluxe Set (V-Mount)
- 4K HDR 4:2:2 10 bits
- Transmission sans fil jusqu’à 1500m
- Zéro délai
- Jusqu’à 6 récepteurs
- Compatible avec avec tous les appareils de la gamme Bolt 4K
- Transmission des métadonnées de la caméra, du timecode et des start/stop flags
- Compact et léger
- Application dédiée application Bolt Manager App
- Cryptage AES-256 et DFS amélioré
CARACTÉRISTIQUES
| RECEIVER SPEC: | |
| Video Inputs | N/A |
| Video Outputs | 3G-SDI SMPTE 424M standard/75 Ω (BNC x 1), 1x HDMI 1.4b Type-A receptacle |
| SDI Ancillary Data Support | Supports transmitting metadata, timecode, |
| and start/stop flags from most camera manufacturers. | |
| Please refer to: https://support.teradek.com/hc/en-us/articles/217446087 | |
| Colour Sampling | SDI: YCbCr 4:2:2 |
| 10-Bit/HDMI: : RGB 4:4:4, 8-bit | |
| Delay (TX to RX) | <0.001sec (without format conversions) |
| Supported Resolutions | 4Kp23.98/24/25/29.97/30 (HDMI only) |
| 1080p23.98/24/25/29.97/30/50/59.94/60 | |
| 1080psf23.98/24/25/29.97/30 | |
| 1080i50/59.94/60 | |
| 720p50/59.94/60 | |
| 480p50 | |
| 576p59.94/60 | |
| 480i(NTSC)/576i(PAL) | |
| Input Cross Conversion | N/A |
| Output Video Scaling | No (4Kp30 signals are output on HDMI, but scaled to |
| 1080p30 and output over SDI. 4Kp60 signals received from Bolt 4K XT | |
| devices are scaled to 1080p60 and output over both HDMI and SDI outputs) | |
| Video Compression | N/A |
| Colour Correction | None |
| Test Pattern Generator | Yes |
| Spectrum Analyser | Yes |
| Audio Compression | 48kHz 24-bit PCM |
| Audio Input | N/A |
| Audio Output | Embedded SDI/HDMI Audio Input (2 channel) |
| Dimensions | 4.8” x 3.7” x 1” (122 x 94 x 27mm) |
| Weight | 10.3oz (292g) |
| Construction | Milled aluminium (chassis) and regulation-compliant PCB |
| Configuration Interface | OSD with Menu, Joystick Navigation |
| Switches | On/Off Switch |
| Desktop App | Bolt Manager application for OSX & Windows |
| Mobile App | Bolt App |
| USB Interface | Upgrade via Micro-USB |
| Bluetooth Compatibility | Yes |
| Wireless | DFS Frequencies: 5.270 ~ 5.670 GHz |
| Non-DFS Frequencies: 5.190 ~ 5.230 GHz and 5.755 ~ 5.795 GHz | |
| Bluetooth | 2.4 GHz |
| RF Channel Selection | Auto, Manual |
| Encryption | AES-256, RSA-1024 key exchange |
| RF power | 17 dbm EIRP (1x external 2dBi antennas; <51mW transmit power) |
| Antennas | 5x External 2dBi antennas (included) |
| Range | Up to 3000 ft line of sight (5000 ft with optional Bolt 4K Array Antenna) |
| Multicast | Can connect one transmitter to up to 6 receivers |
| Noise Rejection | Can coexist with Wi-Fi and 5GHz cordless phones, |
| and can operate up to 6 sets in same location | |
| Interoperability | Can transmit wireless video to all ranges of |
| Bolt 4K XT and Bolt 4K LT receivers (limited by shortest range device) | |
| Power Input | 2-Pin Circular locking connector 6-28 VDC |
| Battery | None, optional Sony/Canon dual battery plate |
| Nominal Power Consumption | 11 Watts |
| Operating Temperature | 0~40 deg-C |
| Mountability | Multiple mounting options with 3/8”x16 and 1/4-20” holes |
| TRANSMITTER SPEC: | |
| Video Inputs | 3G-SDI SMPTE 424M standard/75 Ω (BNC x 1), 1x HDMI 1.4b Type-A receptacle |
| Video Outputs | 3G-SDI SMPTE 424M standard/75 Ω (BNC x 1) |
| SDI Ancillary Data Support | Supports transmitting metadata, timecode, |
| and start/stop flags from most camera manufacturers. | |
| Please refer to: https://support.teradek.com/hc/en-us/articles/217446087 | |
| Colour Sampling | SDI: YCbCr 4:2:2 |
| 10-Bit/HDMI: : RGB 4:4:4, 8-bit | |
| Delay (TX to RX) | <0.001sec (without format conversions) |
| Supported Resolutions | 4Kp23.98/24/25/29.97/30 (HDMI only) |
| 1080p23.98/24/25/29.97/30/50/59.94/60 | |
| 1080psf23.98/24/25/29.97/30 | |
| 1080i50/59.94/60 | |
| 720p50/59.94/60 | |
| 480p50 | |
| 576p59.94/60 | |
| 480i(NTSC)/576i(PAL) | |
| Input Cross Conversion | Yes, HDMI to SDI (4Kp30 HDMI input is scaled and |
| looped out as 1080p30 on SDI loopout) | |
| Video Compression | Visually lossless |
| Colour Correction | None |
| Test Pattern Generator | N/A |
| Spectrum Analyser | N/A |
| Audio Compression | 48kHz 24-bit PCM |
| Audio Input | Embedded SDI/HDMI Audio Input (2 channel) |
| Audio Output | N/A |
| Dimensions | 2.4” x 4.1” x 1.3” (60 x 103 x 33mm) |
| Weight | 7.3oz (206g) |
| Construction | Milled aluminium (chassis) and regulation-compliant PCB |
| Configuration Interface | OSD with Menu, Joystick Navigation |
| Switches | On/Off Switch |
| Desktop App | Bolt Manager application for OSX & Windows |
| Mobile App | Bolt App |
| USB Interface | Upgrade via Micro-USB |
| Bluetooth Compatibility | Yes |
| Wireless | DFS Frequencies: 5.270 ~ 5.670 GHz |
| Non-DFS Frequencies: 5.190 ~ 5.230 GHz and 5.755 ~ 5.795 GHz | |
| Bluetooth | 2.4 GHz |
| RF Channel Selection | Auto, Manual |
| Encryption | AES-256, RSA-1024 key exchange |
| RF power | 19 dbm EIRP (2x external 2dBi antennas; <80mW transmit power) |
| Antennas | 2x External 2dBi antennas (included) |
| Range | Up to 3000 ft line of sight (5000 ft with optional Bolt 4K Array Antenna) |
| Multicast | Can connect one transmitter to up to 6 receivers |
| Noise Rejection | Can coexist with Wi-Fi and 5GHz cordless phones, |
| and can operate up to 6 sets in same location | |
| Interoperability | Can transmit wireless video to all ranges of |
| Bolt 4K XT and Bolt 4K LT receivers (limited by shortest range device) | |
| Power Input | 2-Pin Circular locking connector 6-28 VDC |
| Battery | None, optional Sony/Canon dual battery plate |
| Nominal Power Consumption | 9 Watts |
| Operating Temperature | 0~40 deg-C |
| Mountability | Multiple mounting options with M3 and 1/4-20” holes |
CONTENU DE LA BOITE
1x Bolt 4K LT MAX TX
1x Bolt 4K LT MAX RX V-Mount
1x Antenna Array Plate 3rd Gen, V-Mount
1x Teradek XL SKB Case
1x Universal Ultra Arm Mini (1/4-20 & 3/8-16)
1x Lightstand Adapter 1/4-20in
1x Hot Shoe Adaptor
1x 18 Inch 2-pin Lemo to P-Tap Cable
1x 3 Foot USB Male Type A to USB Male Type B Cable
2x 18 Inch Ultra Thin HDMI Male Type A to HDMI Male Type A Cable
2x 10 Inch SDI BNC to SDI BNC Cable
1x 6 Foot 2-pin Lemo to 18W AC Adapter (International)
7x Antenna 2dBi V4.9-7.3GHz RP-SMA
3x Antenna 2dBi H Mushroom V4.9-7.3Ghz RP-SMA
5x 4 inch RP-SMA Male to RP-SMA Male Antenna Cables